1. Lift the black cover off.
    • Lift the black cover off.

    • Remove all 4 Phillips #2 screws.

  2. Remove the two 24mm Phillips #2 screws.
    • Remove the two 24mm Phillips #2 screws.

    • Remove the three 8mm Phillips #2 screws.

    • Lift the back and pry the back off.

    • The panel is held in with clips on the side. It needs a lot of force the take it off.

    • Remove the four 5mm nut screws.

    • Remove the seven Phillips #1 screws.

    • Remove the three Phillips #2 screws.

    • Remove the two data/power cables.

    • Remove the two speaker cables.

    • Pull the two tabs.

    • Pull the connector off.

    • Remove the switch cable off.

    • Remove the two Phillips #2 screws.

    • Remove the four display power cables.

    • These cables are interchangeable.

    • Lift the display out.

    • Remove the four Phillips #2 screws.

    • These screws release the display from its enclosure. Hold the screen when removing these screws.

    • Remember to plug in all the cables on the display.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Padraic Hoselton

Mitglied seit 22.08.2017

2.816 Reputation

13 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

279 Mitglieder

772 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 39