Zum Hauptinhalt wechseln

Einleitung

This short, simple guide will help you replace the rubber keyboard buttons on a Mitsubishi T200 cellphone.

  1. Begin disassembling the phone by removing the back of the phone and the battery.
    • Begin disassembling the phone by removing the back of the phone and the battery.

  2. Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver
    • Remove the back plate by removing the 4 screws in the back plate using an appropriately sized Philips screwdriver

  3. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  4. Pry the font plastic component from the “motherboard” component.
    • Pry the font plastic component from the “motherboard” component.

  5. Take out the old rubber keypad and replace with a new one.
    • Take out the old rubber keypad and replace with a new one.

  6. Reassemble by following previous steps in reverse order.
    • Reassemble by following previous steps in reverse order.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Katherine

Mitglied seit: 13.02.2014

22 Reputation

1 Anleitung geschrieben

Team

Ohio State, Team 1-5, Meza Spring 2014 Mitglied von Ohio State, Team 1-5, Meza Spring 2014

OSU-MEZA-S14S1G5

4 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 506