Zum Hauptinhalt wechseln

Modem & WIFI Card Prerequisite

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: Schritt 1, Bild 1 von 3 Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: Schritt 1, Bild 2 von 3 Modem & WIFI Card Prerequisite, Modem & WIFI Card Prerequisite: Schritt 1, Bild 3 von 3
    In diesem Schritt verwendetes Werkzeug:
    Anti-Static Wrist Strap
    $7.95
    Kaufen
    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a size #0 Phillips screwdriver.

    • The screws do not come completely out.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

  2. Modem & WIFI Card Prerequisite: Schritt 2, Bild 1 von 2 Modem & WIFI Card Prerequisite: Schritt 2, Bild 2 von 2
    • Once the screws are loose, open the panel using a plastic opening tool to access the components below.

    • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Team

Master Techs Mitglied von Master Techs

Community

322 Mitglieder

2.541 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 5

Insgesamt: 89