Zum Hauptinhalt wechseln

Einleitung

This process involves first removing the battery, outer case, and motherboard. After, the keypad can be easily removed.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Hold the phone and pull the back latch down towards the bottom. Remove the back panel by releasing the latch and lifting from the top.
    • Hold the phone and pull the back latch down towards the bottom.

    • Remove the back panel by releasing the latch and lifting from the top.

  2. Remove the battery by pushing the bottom end towards the top, then lifting up. Remove the battery by pushing the bottom end towards the top, then lifting up. Remove the battery by pushing the bottom end towards the top, then lifting up.
    • Remove the battery by pushing the bottom end towards the top, then lifting up.

  3. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  4. Once the battery is out, unscrew the six 7.0 mm screws with T-6 screwdriver. Once the screws are removed, simply lift the back panel off Once the screws are removed, simply lift the back panel off
    • Once the battery is out, unscrew the six 7.0 mm screws with T-6 screwdriver.

    • Once the screws are removed, simply lift the back panel off

  5. Remove the motherboard by lifting it up and out. Remove the motherboard by lifting it up and out. Remove the motherboard by lifting it up and out.
    • Remove the motherboard by lifting it up and out.

  6. Peel the keypad from the front case. The keypad may be stuck either to the logic board, below the screen, or the phone case itself. The keypad may be stuck either to the logic board, below the screen, or the phone case itself.
    • Peel the keypad from the front case.

    • The keypad may be stuck either to the logic board, below the screen, or the phone case itself.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mitchell Nesheim

Mitglied seit: 15.04.2012

26 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 6-21, Amido Spring 2012 Mitglied von Cal Poly, Team 6-21, Amido Spring 2012

CPSU-AMIDO-S12S6G21

4 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 496