Zum Hauptinhalt wechseln

Einleitung

Use this guide to replace your Defy's display assembly. Replacing the display assembly will give you a new front glass panel and digitizer.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Motorola Defy Display Assembly Replacement, Display Assembly: Schritt 1, Bild 1 von 2 Motorola Defy Display Assembly Replacement, Display Assembly: Schritt 1, Bild 2 von 2
    • Remove the battery cover and the battery itself.

  2. Motorola Defy Display Assembly Replacement: Schritt 2, Bild 1 von 2 Motorola Defy Display Assembly Replacement: Schritt 2, Bild 2 von 2
    • Using a Torx T5 screwdriver, remove both screws near the camera.

  3. Motorola Defy Display Assembly Replacement: Schritt 3, Bild 1 von 1
    • Using the Torx T5 screwdriver, remove all 7 screws around the mobile: 3 on each side + 1 on the botton.

  4. Motorola Defy Display Assembly Replacement: Schritt 4, Bild 1 von 3 Motorola Defy Display Assembly Replacement: Schritt 4, Bild 2 von 3 Motorola Defy Display Assembly Replacement: Schritt 4, Bild 3 von 3
    • Using a plastic opener tool, open the device removing the back cover.

    • Remove the power button and volume button.

  5. Motorola Defy Display Assembly Replacement: Schritt 5, Bild 1 von 3 Motorola Defy Display Assembly Replacement: Schritt 5, Bild 2 von 3 Motorola Defy Display Assembly Replacement: Schritt 5, Bild 3 von 3
    • After opening the device, carefully, using the plastic opening tool, peel off the lcd and digitalizer conectors from the mainboard.

  6. Motorola Defy Display Assembly Replacement: Schritt 6, Bild 1 von 1
    • Remove the two yellow rubber protectors near the screws. The rectangular yellow rubber protector might fall off too so put it aside.

  7. Motorola Defy Display Assembly Replacement: Schritt 7, Bild 1 von 1
    • Separate the Frame + Digitizer, the LCD and the mainboard.

  8. Motorola Defy Display Assembly Replacement: Schritt 8, Bild 1 von 3 Motorola Defy Display Assembly Replacement: Schritt 8, Bild 2 von 3 Motorola Defy Display Assembly Replacement: Schritt 8, Bild 3 von 3
    • Now, using a plastic opening tool, carefully insert it between the frame and the glass and force it slowly to remove the adhesive. You may also heat it to help.

    • Now, Remove the rest of adhesive from the frame to better apply the new digitizer on it.

    • Follow this backwards to reassemble the mobile.

Abschluss

To reassemble your device, follow these instructions in reverse order.

11 weitere Nutzer haben diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 2

Insgesamt: 5,610