Zum Hauptinhalt wechseln

Motorola E815 Keypad Replacement

Was du brauchst

  1. Motorola E815 Keypad Replacement, Battery: Schritt 1, Bild 1 von 1
    • Locate the back cover release slide.

    • Use your finger to slide it down.

  2. Motorola E815 Keypad Replacement: Schritt 2, Bild 1 von 1
    • Remove the back cover by pulling it away from the phone.

  3. Motorola E815 Keypad Replacement: Schritt 3, Bild 1 von 2 Motorola E815 Keypad Replacement: Schritt 3, Bild 2 von 2
    • Locate the battery removal slot.

    • Use your finger to pull the battery out from the top.

    • Remove the battery.

  4. Motorola E815 Keypad Replacement, Disassembling Motorola E815 Antenna: Schritt 4, Bild 1 von 1
    • Locate the antenna port on the top of the phone.

    Removing Antenna Only

    Zoie E - Antwort

  5. Motorola E815 Keypad Replacement: Schritt 5, Bild 1 von 2 Motorola E815 Keypad Replacement: Schritt 5, Bild 2 von 2
    • Grip the plastic support post and unscrew the apparatus using a counterclockwise twist.

    • Pull the apparatus up and out of the phone.

  6. Motorola E815 Keypad Replacement, Keypad: Schritt 6, Bild 1 von 1
    • Locate the two screws on the backside of the phone.

    • Unscrew the two screws using a T6 Screwdriver.

  7. Motorola E815 Keypad Replacement: Schritt 7, Bild 1 von 3 Motorola E815 Keypad Replacement: Schritt 7, Bild 2 von 3 Motorola E815 Keypad Replacement: Schritt 7, Bild 3 von 3
    • Gently pull the top section of the phone upwards until you feel some resistance.

    • Locate the brown connector that runs from the top section of the phone to the circuit board under the keypad.

    • Using tweezers, gently pry the connector from the circuit board.

    • Carefully detach the two sections of the phone.

  8. Motorola E815 Keypad Replacement: Schritt 8, Bild 1 von 3 Motorola E815 Keypad Replacement: Schritt 8, Bild 2 von 3 Motorola E815 Keypad Replacement: Schritt 8, Bild 3 von 3
    • Using the blue pry tool, carefully pull the keypad frame away from the keypad.

    • Gently remove the keypad frame from the keypad.

    • Lift the silicone keypad cover off.

  9. Motorola E815 Keypad Replacement: Schritt 9, Bild 1 von 2 Motorola E815 Keypad Replacement: Schritt 9, Bild 2 von 2
    • Rotate the phone around so that you are looking at the battery cavity.

    • Locate the screws on the bottom base of the phone.

    • Unscrew the two screws using a T6 Screwdriver.

  10. Motorola E815 Keypad Replacement: Schritt 10, Bild 1 von 2 Motorola E815 Keypad Replacement: Schritt 10, Bild 2 von 2
    • Rotate the phone back to the front side.

    • Slowly lift the bottom portion of the keypad off of the phone until you feel resistance.

  11. Motorola E815 Keypad Replacement: Schritt 11, Bild 1 von 3 Motorola E815 Keypad Replacement: Schritt 11, Bild 2 von 3 Motorola E815 Keypad Replacement: Schritt 11, Bild 3 von 3
    • Using tweezers, carefully detach the yellow connector strip from the circuit board by lifting up.

    • Separate the keypad from the circuit board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Zoie E

Mitglied seit: 01/12/11

603 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 14-8, Forte Winter 2011 Mitglied von Cal Poly, Team 14-8, Forte Winter 2011

CPSU-FORTE-W11S14G8

5 Mitglieder

5 Anleitungen geschrieben

2 Kommentare

We should have a motherboard replacement.

Santi12008 - Antwort

We need to fullify more this content.

Santi12008 - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 2,085