Zum Hauptinhalt wechseln

Motorola Moto 360 Rear Cover Replacement

Was du brauchst

  1. Motorola Moto 360 Rear Cover Replacement, Rear Cover: Schritt 1, Bild 1 von 1
    • Set the watch face down on a flat surface.

    • Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.

    • Follow the instructions here to remove the back cover without force by using some needles in the right places:

    • Motorola Moto 360 Gehäuseverschlüsse Austausch

    • Then continue with step 5. Or don't use needles and just continue with the next steps.

  2. Motorola Moto 360 Rear Cover Replacement: Schritt 3, Bild 1 von 2 Motorola Moto 360 Rear Cover Replacement: Schritt 3, Bild 2 von 2
    • Gently slide the blue opening pick between the rear cover and the metal casing.

    • The rear cover is extremely fragile. Be very delicate when using the opening pick.

    • Work your way entirely around the rear cover.

    • It may take several attempts of reheating the adhesive to get the rear cover loose enough to pull off.

  3. Motorola Moto 360 Rear Cover Replacement: Schritt 4, Bild 1 von 1
    • Once the adhesive has been successfully loosened, gently pull the rear cover off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

9 weitere Nutzer:innen haben diese Anleitung absolviert.

Cole Twitchell

Mitglied seit: 01/30/15

1.688 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 17-32, Amido Winter 2015 Mitglied von Cal Poly, Team 17-32, Amido Winter 2015

CPSU-AMIDO-W15S17G32

4 Mitglieder

18 Anleitungen geschrieben

Ein Kommentar

How does this *rear cover replacement* count as "no parts required"?

Kyle Mitchell - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 11

Insgesamt: 12,794