Einleitung
Changing the wrist strap may be easier if the rear cover is taken off first, but removing the rear cover is not required and risks damage to the rear of your device.
Was du brauchst
-
-
Locate the spring-loaded pin that attaches the wrist strap to the watch.
-
There is a tiny groove on the end of the pin. This is where you will place the tweezers.
-
-
-
-
Use the tweezers to compress the spring-loaded pin so the strap can be removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
12 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 17-32, Amido Winter 2015 Mitglied von Cal Poly, Team 17-32, Amido Winter 2015
CPSU-AMIDO-W15S17G32
4 Mitglieder
18 Anleitungen geschrieben
