Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will show users how to replace a defective or damaged rear camera lens in the Motorola Moto G7 Play. This guide applies to both the XT1952-3 and XT1952-2 models. The rear camera lens is capable of taking 13MP photos as well as 1080p video. Users may need to replace the camera if the lens is badly damaged. A damaged lens affects photo quality in the camera.
Was du brauchst
-
-
-
Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.
-
-
-
Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.
-
-
-
Once the motherboard cover is removed, use the iFixit opening tool to disconnect the ribbon cable connecting the camera to the motherboard.
-
The camera can now be removed and is ready to be replaced.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
How long do you have to use the heat gun before the glue loosens?
Pamela DeMars - Antwort
It's worked for me with about maybe 15-20 seconds of heating per side.
Matthieu Bister - Antwort
I could not get the pick started under the cover. Ruined several tips. I started with a hair dryer and switched to a heat gun. Be careful with a heat gun! 😬
K Goatee - Antwort