Einleitung

If your Moto Z2 Force screen is cracked or not operating correctly, use this guide for the steps to replace it.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Place the phone on a flat surface with the screen facing up.
    • Place the phone on a flat surface with the screen facing up.

    • Insert the flat end of a nylon spudger into the crease separating the screen and the body in the lower right corner of the phone.

    • Pry open part of the screen by pulling the tool and the screen toward you.

    • You may be required to use a heating element, such as the iOpener, to heat and loosen the adhesive underneath before attempting to pry it open.

    Kommentar hinzufügen

  2. Wedge the plastic opening tool between the gap created by separating the screen and body of the phone in the right hand corner to hold it open.
    • Wedge the plastic opening tool between the gap created by separating the screen and body of the phone in the right hand corner to hold it open.

    • Insert the nylon spudger into the lower left corner of the screen and pry the screen toward you.

    • Continue to insert the plastic opening and spudger tools around the phone, and pry open the screen until it is fully separated from the device.

    • Remove the screen gently and slowly as the screen may crack otherwise.

    Kommentar hinzufügen

    • Remove the screen by pulling from right to left and placing the screen face down on the flat surface next to the main body of the device.

    Kommentar hinzufügen

    • Using the flat end of the nylon spudger, pull off the black tape on top of the screen connector piece that the black ribbon is attached to.

    Kommentar hinzufügen

    • Insert the black spudger under the lock of the latch connecting the black ribbon of the screen to the phone body.

    • Pull up on the lock to unlock the latch.

    • Separate the black ribbon from the latch by pulling gently to the left.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Amelia Fruda

Mitglied seit 24.01.2018

291 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team S2-G1, Livingston Winter 2018 Mitglied von Cal Poly, Team S2-G1, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G1

4 Mitglieder

6 Anleitungen geschrieben

What about installing the new screen?

John - Antwort

lol exactly what i was thinking, john!!

like what the !&&*….guide us thru removing the entire screen and then just leave us with our d in our hand lol

PETE ZITO - Antwort

Just do the same thing backwards.

Jade Davis -

Can I use a z2 play screen on the z2 force?

Paulo Alberto Werhli Meier - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 18

Letzte 7 Tage: 117

Letzte 30 Tage: 711

Insgesamt: 4,143