Zum Hauptinhalt wechseln

Ersatzteile

Keine Ersatzteile angegeben.

  1. Push down on the black tab located at the top center of the Motorola phone.
    • Push down on the black tab located at the top center of the Motorola phone.

  2. Remove the battery by pulling the battery from the top center.
    • Remove the battery by pulling the battery from the top center.

  3. Remove the four (4) T6 Torx screws from the back of the metal back plate.
    • Remove the four (4) T6 Torx screws from the back of the metal back plate.

  4. Insert the flat end of a spudger and pry the metal cover up off the phone. Insert the flat end of a spudger and pry the metal cover up off the phone.
    • Insert the flat end of a spudger and pry the metal cover up off the phone.

  5. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.
    • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.

  6. Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard. De-route the antenna cable by pulling it out.
    • Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.

    • De-route the antenna cable by pulling it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jorge Trujillo

Mitglied seit: 19.05.2011

499 Reputation

4 Anleitungen geschrieben

Team

CSU Los Angeles, Team 1-1, Nelson Spring 2011 Mitglied von CSU Los Angeles, Team 1-1, Nelson Spring 2011

CSULA-NELSON-S11S1G1

2 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,739