Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Motorola Slvr L7 Camera Assembly Replacement

Was du brauchst

  1. Motorola Slvr L7 Camera Assembly Replacement, Camera Assembly: Schritt 1, Bild 1 von 1
    • Push down on the black tab located at the top center of the Motorola phone.

  2. Motorola Slvr L7 Camera Assembly Replacement: Schritt 2, Bild 1 von 1
    • Remove the battery by pulling the battery from the top center.

  3. Motorola Slvr L7 Camera Assembly Replacement: Schritt 3, Bild 1 von 1
    • Remove the four (4) T6 Torx screws from the back of the metal back plate.

  4. Motorola Slvr L7 Camera Assembly Replacement: Schritt 4, Bild 1 von 2 Motorola Slvr L7 Camera Assembly Replacement: Schritt 4, Bild 2 von 2
    • Insert the flat end of a spudger and pry the metal cover up off the phone.

  5. Motorola Slvr L7 Camera Assembly Replacement: Schritt 5, Bild 1 von 2 Motorola Slvr L7 Camera Assembly Replacement: Schritt 5, Bild 2 von 2
    • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.

  6. Motorola Slvr L7 Camera Assembly Replacement: Schritt 6, Bild 1 von 2 Motorola Slvr L7 Camera Assembly Replacement: Schritt 6, Bild 2 von 2
    • Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.

    • De-route the antenna cable by pulling it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jorge Trujillo

Mitglied seit: 05/19/11

520 Reputation

4 Anleitungen geschrieben

Team

CSU Los Angeles, Team 1-1, Nelson Spring 2011 Mitglied von CSU Los Angeles, Team 1-1, Nelson Spring 2011

CSULA-NELSON-S11S1G1

2 Mitglieder

4 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 2,998