Einleitung

Want to replace your keypad with a new one? Follow the steps provided, and you'll have it working in no time.

Ersatzteile

Kein Ersatzteil erforderlich.

Flip the phone over so that the back is visible.
  • Flip the phone over so that the back is visible.

  • Push down on the silver button using your fingernail or thumbnail. Push down all the way until the button stops.

Kommentar hinzufügen

While holding down the silver button, simultaneously pull downward on the rear cover, then lift it off to reveal the battery. This will only take a moment to do. This will only take a moment to do.
  • While holding down the silver button, simultaneously pull downward on the rear cover, then lift it off to reveal the battery.

  • This will only take a moment to do.

Kommentar hinzufügen

Using your thumbnail and fingernail, grip the battery where indicated as "pull here" and lift the battery upward, starting at that side. Remove the battery completely by lifting it straight out of the phone. Remove the battery completely by lifting it straight out of the phone.
  • Using your thumbnail and fingernail, grip the battery where indicated as "pull here" and lift the battery upward, starting at that side.

  • Remove the battery completely by lifting it straight out of the phone.

Kommentar hinzufügen

When replacing the battery, ensure that the side that has the "pull here" arrows goes toward the bottom of the phone. Place the side of the battery with the metallic contacts in toward the inside of the phone, making a full connection with the contacts within the phone (shown in the red rectangle).
  • When replacing the battery, ensure that the side that has the "pull here" arrows goes toward the bottom of the phone. Place the side of the battery with the metallic contacts in toward the inside of the phone, making a full connection with the contacts within the phone (shown in the red rectangle).

Kommentar hinzufügen

Mac • RAM-Erweiterungssets
Beschleunigen Sie Ihren Mac. Erweitern Sie seinen Speicher.
Mac • RAM-Erweiterungssets
Get more memory out of your Mac.
Using a small flat head screwdriver or your fingernail, remove the rubber covers near the top of the phone Using a small flat head screwdriver or your fingernail, remove the rubber covers near the top of the phone Using a small flat head screwdriver or your fingernail, remove the rubber covers near the top of the phone
  • Using a small flat head screwdriver or your fingernail, remove the rubber covers near the top of the phone

Kommentar hinzufügen

There are four Torx screws located on the four corners of the rear panel Remove all four screws using the T6 Torx Screwdriver. Remove all four screws using the T6 Torx Screwdriver.
  • There are four Torx screws located on the four corners of the rear panel

  • Remove all four screws using the T6 Torx Screwdriver.

Kommentar hinzufügen

Unscrew the antenna. Remove the antenna protective tubing Remove the antenna protective tubing
  • Unscrew the antenna.

  • Remove the antenna protective tubing

Kommentar hinzufügen

There are four light gray tabs located around the phone (two on each side) Using your finger nail or a flat head screwdriver, pull the gray tab away from the body while simultaneously lifting upward on the black rear panel. Once all four tabs are removed, lift up the back panel to reveal the interior logic board.
  • There are four light gray tabs located around the phone (two on each side)

  • Using your finger nail or a flat head screwdriver, pull the gray tab away from the body while simultaneously lifting upward on the black rear panel.

  • Once all four tabs are removed, lift up the back panel to reveal the interior logic board.

Kommentar hinzufügen

Make sure the phone appears as shown after removing the rear panel.
  • Make sure the phone appears as shown after removing the rear panel.

Kommentar hinzufügen

Gently lift up the logic board by placing your index finger at the top while keeping your thumb at the bottom of the phone for leverage. Gently lift up the logic board by placing your index finger at the top while keeping your thumb at the bottom of the phone for leverage. Gently lift up the logic board by placing your index finger at the top while keeping your thumb at the bottom of the phone for leverage.
  • Gently lift up the logic board by placing your index finger at the top while keeping your thumb at the bottom of the phone for leverage.

Kommentar hinzufügen

Gently remove the keypad from the phone by getting a grip on the top of the keypad and slowly peeling it top to bottom. Gently remove the keypad from the phone by getting a grip on the top of the keypad and slowly peeling it top to bottom. Gently remove the keypad from the phone by getting a grip on the top of the keypad and slowly peeling it top to bottom.
  • Gently remove the keypad from the phone by getting a grip on the top of the keypad and slowly peeling it top to bottom.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Stephanie

Mitglied seit 14.01.2010

1 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 4-15, Forte Winter 2010 Mitglied von Cal Poly, Team 4-15, Forte Winter 2010

CPSU-FORTE-W10S4G15

5 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,097