Was du brauchst
-
-
Use the blue plastic opening tool to pry off all four of the rubber stickers from the upper inside face.
-
Use the Torx T5 screwdriver to remove the four 5.4 mm screws from the upper inner face.
-
-
-
Use a flathead screwdriver or plastic opening tools to help pry the top cover away from the phone.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Clemson, Team 14-1, Benson Fall 2012 Mitglied von Clemson, Team 14-1, Benson Fall 2012
CLEM-BENSON-F12S14G1
4 Mitglieder
23 Anleitungen geschrieben
Ein Kommentar
It's fantastic when someone takes the time to compile photos and directions as good as these. Not only does it make the repairs possible, but it makes them so much easier. Thanks!
