Einleitung
This guide outlines how to replace an LCD screen on the Moultrie I45 GameSpy camera
Was du brauchst
-
-
Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.
-
-
-
-
Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.
-
-
-
Using a Philips head screwdriver, remove the 12, 3mm screws from the board.
-
-
-
Gently remove the circuit board from the face of the camera
Mention the two pieces (black piece) of the LCD screen that you need to remove
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
make sure to add commas.
Step 1- remove the 8, 6mm...
Step 2- Using a philips head screwdriver, remove the 6, 4mm screws...
Same thing with step 6. Good page!
Jesica Bartell - Antwort