Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 2 : Schritt 1, Bild 2 von 2
    • Before performing this repair, be sure that your machine is unplugged and dry and that your work space is clean.

    • Flip the Mr. Coffee DW13 over so that the lid is facing away from you and the base is facing toward you.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 2 : Schritt 2, Bild 2 von 2
    • Remove the eight 11 mm screws that secure the base of the machine with a Phillips Head #2 screwdriver.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Gently lift the base cover to expose the inside of the coffee machine.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 2 : Schritt 4, Bild 2 von 2
    • Locate the white tab that covers and holds the power cord in place. It has two screws on either side of it.

    • Use a #2 Philips Head screwdriver to unscrew the two 13mm screws holding the tab in place.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 2 : Schritt 5, Bild 2 von 2
    • Gently lift up on the white tab, removing it from the coffee machine.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 2 : Schritt 6, Bild 2 von 2
    • Locate the 2 electrical connectors running from the black plastic-coated power cord to the interior of the power switch.

    • One cord is copper colored and ends at the power switch in a silver metal square.

    • The other cord is white and ends at the power switch in a black plastic square.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 2 : Schritt 7, Bild 2 von 2
    • Grasp the copper cord close to the power switch. Lightly pull the silver end tab from the end to detach it.

  8. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 8, Bild 1 von 2 : Schritt 8, Bild 2 von 2
    • Lightly pull the white cord away from the power switch by grasping the black plastic-coated head.

    • There are two white cords attached to each other. Pull them apart by grasping the different black heads and separating them.

  9. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 9, Bild 1 von 3 : Schritt 9, Bild 2 von 3 : Schritt 9, Bild 3 von 3
    • Pull the power cord through the hole at the back of the base of the machine, followed by the two colored cords.

Ziellinie

3 weitere Nutzer:innen haben diese Anleitung absolviert.

Tess Bradley

Mitglied seit: 01/26/14

373 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 10-31, Maness Winter 2014 Mitglied von Cal Poly, Team 10-31, Maness Winter 2014

CPSU-MANESS-W14S10G31

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 8

Letzte 30 Tage: 27

Insgesamt: 3,180