Zum Hauptinhalt wechseln

Einleitung

Display how to remove the battery.

  1. Insert spudger into the USB Micro slot and pry the case apart.
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger. Gently separate the case so none of the cords inside are disconnected
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen

    Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen
  4. After prying the device apart, it should look like this.
    • After prying the device apart, it should look like this.

  5. Use the wide plastic opening tool to slowly pry each side of the battery up. Be careful not to bend the battery too much. Be careful not to bend the battery too much.
    • Use the wide plastic opening tool to slowly pry each side of the battery up.

    • Be careful not to bend the battery too much.

  6. Use the Soldering Iron to disconnect the each cable.
    • Use the Soldering Iron to disconnect the each cable.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Hee Jin Cho

Mitglied seit: 14.01.2015

113 Reputation

1 Anleitung geschrieben

Team

UW Tacoma, Team 3-6, Rose Winter 2015 Mitglied von UW Tacoma, Team 3-6, Rose Winter 2015

UWT-ROSE-W15S3G6

3 Mitglieder

14 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

Insgesamt: 352