Zum Hauptinhalt wechseln

Munchkinz External Casing Removal

Was du brauchst

  1. Munchkinz External Casing Removal, Opening Device: Schritt 1, Bild 1 von 1
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. Munchkinz External Casing Removal, Pry Device Apart: Schritt 2, Bild 1 von 2 Munchkinz External Casing Removal, Pry Device Apart: Schritt 2, Bild 2 von 2
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. Munchkinz External Casing Removal, Separated Device: Schritt 3, Bild 1 von 1
    • After prying the device apart, it should look like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

UW Tacoma, Team 3-6, Rose Winter 2015 Mitglied von UW Tacoma, Team 3-6, Rose Winter 2015

UWT-ROSE-W15S3G6

3 Mitglieder

14 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 157