Einleitung

Removing the antenna will allow you access to other parts of the device or it can replace the antenna if it is not working properly.

Turn the device so that the bottom is facing up.
  • Turn the device so that the bottom is facing up.

Kommentar hinzufügen

Use the plastic opening tool to carefully lift the rubber stops in each corner. Do not completely remove the rubber stops, because they are difficult to replace. Do not completely remove the rubber stops, because they are difficult to replace.
  • Use the plastic opening tool to carefully lift the rubber stops in each corner.

  • Do not completely remove the rubber stops, because they are difficult to replace.

Kommentar hinzufügen

Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
  • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

Kommentar hinzufügen

Lift the lower case straight up from the rest of the router. Lift the lower case straight up from the rest of the router.
  • Lift the lower case straight up from the rest of the router.

Kommentar hinzufügen

Mac • RAM-Erweiterungssets
Beschleunigen Sie Ihren Mac. Erweitern Sie seinen Speicher.
Mac • RAM-Erweiterungssets
Get more memory out of your Mac.
Remove the clear plastic casing by lifting it straight up from the router. Remove the clear plastic casing by lifting it straight up from the router.
  • Remove the clear plastic casing by lifting it straight up from the router.

Kommentar hinzufügen

Separate the motherboard from the top shell by lifting it straight up from the router. Separate the motherboard from the top shell by lifting it straight up from the router.
  • Separate the motherboard from the top shell by lifting it straight up from the router.

Kommentar hinzufügen

Turn the motherboard, so that the top is facing upwards.
  • Turn the motherboard, so that the top is facing upwards.

  • Place the motherboard on a clean flat surface.

Kommentar hinzufügen

Remove the yellow tape that holds the wire. Make sure that you set the tape aside on a clean surface, so that it can be reused.
  • Remove the yellow tape that holds the wire.

  • Make sure that you set the tape aside on a clean surface, so that it can be reused.

Kommentar hinzufügen

Use tweezers to gently pull the metal bracket that connects the antenna to the motherboard. The wire should now be completely separate from the motherboard. The wire should now be completely separate from the motherboard.
  • Use tweezers to gently pull the metal bracket that connects the antenna to the motherboard.

  • The wire should now be completely separate from the motherboard.

Kommentar hinzufügen

Extend the antenna away from the device, so that it becomes straight.
  • Extend the antenna away from the device, so that it becomes straight.

Kommentar hinzufügen

Find the clips that hold the antenna onto the router. Use one hand to push the clips in, while using your other hand to pull out the antenna. You may need to gently twist the antenna so it can separate from the hole. The antenna may take considerable force to remove.
  • Find the clips that hold the antenna onto the router.

  • Use one hand to push the clips in, while using your other hand to pull out the antenna. You may need to gently twist the antenna so it can separate from the hole.

  • The antenna may take considerable force to remove.

Kommentar hinzufügen

Completely separate the antenna and wire from the rest of the device.
  • Completely separate the antenna and wire from the rest of the device.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jonathon Sather

Mitglied seit 23.01.2013

27 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 3-31, Amido Winter 2013 Mitglied von Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 16

Insgesamt: 3,682