Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Removing the antenna will allow you access to other parts of the device or it can replace the antenna if it is not working properly.
Was du brauchst
-
-
Use the plastic opening tool to carefully lift the rubber stops in each corner.
-
-
-
-
Remove the clear plastic casing by lifting it straight up from the router.
-
-
-
Separate the motherboard from the top shell by lifting it straight up from the router.
-
-
-
Use tweezers to gently pull the metal bracket that connects the antenna to the motherboard.
-
-
-
Find the clips that hold the antenna onto the router.
-
Use one hand to push the clips in, while using your other hand to pull out the antenna. You may need to gently twist the antenna so it can separate from the hole.
-
The antenna may take considerable force to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.