Zum Hauptinhalt wechseln

Einleitung

This is a guide that demonstrates how to isolate the rear case of your camera from the rest of the device.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Electric shock is a huge risk if the battery is not removed while taking the camera apart. Press down and forward on the battery cover latch.
    • Electric shock is a huge risk if the battery is not removed while taking the camera apart.

    • Press down and forward on the battery cover latch.

    • Push the orange latch, in the direction of the arrow on it, to release the battery.

  2. Remove the marked 3mm screws. Separate the two parts of the body of the camera slightly. Make sure not to pull too hard because there are connector ribbons.
    • Remove the marked 3mm screws.

    • Separate the two parts of the body of the camera slightly.

    • Make sure not to pull too hard because there are connector ribbons.

    • Detach the connector ribbons before fully separating the camera into two pieces.

  3. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  4. Remove the labeled 3mm screws using a PH00 screwdriver.
    • Remove the labeled 3mm screws using a PH00 screwdriver.

  5. Remove the brown metal plate.
    • Remove the brown metal plate.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kevin Scott

Mitglied seit: 22.01.2015

422 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 19-10, Maness Winter 2015 Mitglied von Cal Poly, Team 19-10, Maness Winter 2015

CPSU-MANESS-W15S19G10

4 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 674