Einleitung
If your camera will not hold a charge or turn on you may need to remove or replace the battery.
Was du brauchst
-
-
One the bottom right of the camera, locate the battery cover door.
-
Push down with your finger to open the battery cover door.
-
-
-
-
Push up on the orange battery latch to release the battery.
-
Now remove the battery by pulling it out.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Colorado Springs, Team 1-3, May Spring 2015 Mitglied von Colorado Springs, Team 1-3, May Spring 2015
UCCS-MAY-S15S1G3
6 Mitglieder
6 Anleitungen geschrieben
