Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Was du brauchst
-
-
With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.
-
-
-
Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)
-
Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)
-
-
-
-
Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)
-
-
-
Use the Spudger to remove the copper colored light bulb clip.
-
Remove the front cover entierly from the camera body.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cuesta, Team 1-6, Zipperian Fall 2011 Mitglied von Cuesta, Team 1-6, Zipperian Fall 2011
CUESTA-ZIPPERIAN-F11S1G6
2 Mitglieder
6 Anleitungen geschrieben
