Ersatzteile

Kein Ersatzteil erforderlich.

With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.
  • With the lens facing forward, remove the one 4.2 mm screw on the bottom right hand corner of the camera.

Kommentar hinzufügen

Remove the chrome side cover from the body of the camera.
  • Remove the chrome side cover from the body of the camera.

Kommentar hinzufügen

  • Remove the four 3.2 mm screws on the bottom of the camera.

Kommentar hinzufügen

  • Remove the two 3.2 mm screws from the right side of the camera (with lens is facing forward)

  • Remove the one 3.2 mm screw from the left side of the camera (with lens facing foward)

Kommentar hinzufügen

  • Gently separate the back cover from the body of the camera.

  • The back casing will still be connected to the circuit board by a ribbon

Kommentar hinzufügen

  • Use the tweezers to disconnect the ribbon from the circuit board.

Kommentar hinzufügen

  • Remove the one 2.6 mm screw from the left side of the camera (with the lens facing forward)

Kommentar hinzufügen

  • Gently separate the front cover from the body of the camera.

  • The front casing will still be connected to the circuit board by a few wires

Kommentar hinzufügen

  • Remove the two 3.2 mm screws that hold the flash to the front cover.

Kommentar hinzufügen

  • Use the Spudger to remove the copper colored light bulb clip.

  • Remove the front cover entierly from the camera body.

Kommentar hinzufügen

  • From the top view of the camera, remove the one 5.8 mm screw.

  • From the top view of the camera, remove the one 2.8 mm screw

Kommentar hinzufügen

  • Remove the three 3.4 mm screws from the back side of the camera.

Kommentar hinzufügen

  • Remove the two 3.4 mm screws from the side of the camera.

Kommentar hinzufügen

  • Separate the two metal body pieces from the rest of the camera.

Kommentar hinzufügen

  • Gently remove the two ribbons connecting the lens to the mother board.

Kommentar hinzufügen

  • Gently separate the camera lens from the mother board.

Kommentar hinzufügen

  • The mother board is permanently fixed to the battery housing.

  • Mother board cannot be taken a part any further.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

andreas anggasastra

Mitglied seit 14.09.2011

116 Reputation

5 Anleitungen geschrieben

Team

Cuesta, Team 1-6, Zipperian Fall 2011 Mitglied von Cuesta, Team 1-6, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G6

2 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 1,102