Einleitung
Use this guide to replace the back cover.
Was du brauchst
-
-
Remove the two 3.0mm screws on the left side of the camera near the memory card compartment.
-
-
-
-
Carefully open the back cover. Take care as there are connectors still attached.
-
-
-
Disconnect the cable by pulling the head upward along the green circuit board. If you only are changing the LCD, skip this step.
-
-
-
Disconnect the ribbon cable by grabbing the two handles and pulling it directly out of the socket. If you are only changing LCD, skip this step.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.