Einleitung

This guide will outline how to remove a dead battery, as well as how to properly install a new one.

Werkzeuge

Kein Werkzeug erforderlich.

Ersatzteile

    • At the top of the camera, turn the Mode dial to OFF.

  1. Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.
    • Lay the top of the camera down on a flat surface so that the informational tag and battery compartment are accessible.

    • To open the battery compartment, push the latch underneath the word BATTERY to the left.

  2. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Erfolgreich repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  3. Lift the battery compartment cover and remove the old battery.
    • Lift the battery compartment cover and remove the old battery.

  4. Insert the new battery as shown on the underside of the compartment lid.
    • Insert the new battery as shown on the underside of the compartment lid.

  5. Flip the battery compartment lid closed and push the latch to the right.
    • Flip the battery compartment lid closed and push the latch to the right.

    • Flip the camera so that the bottom rests on the table.

    • Turn the Mode dial to [A] to verify that the control panel shows a full power indicator.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cory Layman

Mitglied seit: 04.10.2011

89 Reputation

3 Anleitungen geschrieben

Team

UW Stout, Team 1-5, Zhou Fall 2011 Mitglied von UW Stout, Team 1-5, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G5

5 Mitglieder

3 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 6

Insgesamt: 1,458