Einleitung
This guide will explain how to replace the selection buttons on the camera. There are no hazards associated with this replacement. Let's get started!
Was du brauchst
-
-
Remove the six(3.93mm screws) on the outside of the camera using a Phillips 00 screwdriver.
-
-
-
-
Open the battery compartment door and pull the black back face apart from the front red face.
-
-
-
Secure the black back case in hand and remove selection buttons from the case by pushing them upward and replace them with a new set of buttons.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 2-4, Blackwell Fall 2016 Mitglied von USF Tampa, Team 2-4, Blackwell Fall 2016
USFT-BLACKWELL-F16S2G4
4 Mitglieder
10 Anleitungen geschrieben
