Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
- You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool)
Was du brauchst
-
-
-
Open battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of orange lever. Remove this screw.
-
-
-
Rotate camera to find side panel with lanyard attachment. Detach side panel by lifting bottom corner slightly with the spudger.
-
-
-
Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.
-
-
-
With back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
Cal Poly, Team 18-24, Garner Spring 2011 Mitglied von Cal Poly, Team 18-24, Garner Spring 2011
CPSU-GARNER-S11S18G24
4 Mitglieder
6 Anleitungen geschrieben
