Zum Hauptinhalt wechseln

Einleitung

If the screen on your Nikon Coolpix S5200 is unresponsive or not working, use this repair guide to replace the entire screen,

Ersatzteile

Keine Ersatzteile angegeben.

  1. There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera There should be four screws There should be four screws
    • There are four 0.1 mm screws holding the front and back of the camera together all along the outside of the camera

    • There should be four screws

  2. Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera
    • Use the Phillips Head screw driver head to remove the four 0.1 mm screws surrounding the outer edges of the camera

  3. Pull the plastic back cover off of and away from the LCD screen
    • Pull the plastic back cover off of and away from the LCD screen

  4. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  5. Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components
    • Carefully remove the LCD screen from the silver plate that once held it in place by pulling it away from the internal components

  6. Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip's Head screwdriver in size PH00.
    • Remove the six designated screws sized 0.1 mm from the metal plate using a Phillip's Head screwdriver in size PH00.

  7. Lift the metal plate away from the internal components of the camera
    • Lift the metal plate away from the internal components of the camera

  8. Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen. Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.
    • Carefully remove the LCD screen by pulling it away from the camera. Repeat these steps in reverse order to install the new LCD screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andy Powers

Mitglied seit: 22.09.2015

391 Reputation

3 Anleitungen geschrieben

Team

University of Alabama, Team 1-2, Sydow campbell Fall 2015 Mitglied von University of Alabama, Team 1-2, Sydow campbell Fall 2015

UA-SYDOW CAMPBELL-F15S1G2

4 Mitglieder

3 Anleitungen geschrieben

Shouldn't the replacement LCD screen be considered a part? It is in fact very difficult to replace it without having the part to replace.

joshronsen - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 3

Letzte 30 Tage: 9

Insgesamt: 593