Einleitung

This guide will assist you in replacing your broken, cracked or malfunctioning display screen. For this replacement you will need a Phillips #000 screwdriver and a plastic opening tool.

Ersatzteile

Kein Ersatzteil erforderlich.

Power off the camera before beginning. Remove the battery by sliding the latch located at the bottom of the camera.
  • Power off the camera before beginning.

  • Remove the battery by sliding the latch located at the bottom of the camera.

Kommentar hinzufügen

Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera. Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera.
  • Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera.

Kommentar hinzufügen

Use a plastic opening tool to carefully separate the back panel of the camera. Once loosened, use your fingers to manually separate the two panels. Once loosened, use your fingers to manually separate the two panels.
  • Use a plastic opening tool to carefully separate the back panel of the camera.

  • Once loosened, use your fingers to manually separate the two panels.

Kommentar hinzufügen

Using a plastic opening tool, lift both latches that hold the ribbon cables in place. Using a plastic opening tool, lift both latches that hold the ribbon cables in place. Using a plastic opening tool, lift both latches that hold the ribbon cables in place.
  • Using a plastic opening tool, lift both latches that hold the ribbon cables in place.

Kommentar hinzufügen

Carefully disconnect the orange flat ribbon cables from the latches.
  • Carefully disconnect the orange flat ribbon cables from the latches.

Kommentar hinzufügen

Remove the screen from the case of the camera by carefully pushing on the back of the screen. You may need to push with a little force to get the screen to loosen. You may need to push with a little force to get the screen to loosen.
  • Remove the screen from the case of the camera by carefully pushing on the back of the screen.

    • You may need to push with a little force to get the screen to loosen.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Danielle Morris

Mitglied seit 24.09.2015

153 Reputation

1 Anleitung geschrieben

Team

Texas Tech, Team 22-2, Rauch Fall 2015 Mitglied von Texas Tech, Team 22-2, Rauch Fall 2015

TTU-RAUCH-F15S22G2

3 Mitglieder

1 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 4

Insgesamt: 280