Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 2 : Schritt 1, Bild 2 von 2
    • Press the ON/OFF button to power off the S9700.

    • Not doing so can damage the S9700 or cause electric shock.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 3 : Schritt 2, Bild 2 von 3 : Schritt 2, Bild 3 von 3
    • Place the S9700 upside down

    • Place your finger on the battery compartment cover and gently push toward the front of the S9700.

    • The cover will open up by itself.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 3 : Schritt 3, Bild 2 von 3 : Schritt 3, Bild 3 von 3
    • Push the yellow tab inside the battery compartment in the direction of the arrow. This will allow the battery to spring up.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 2 : Schritt 4, Bild 2 von 2
    • Grab the battery and pull out.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 3 : Schritt 5, Bild 2 von 3 : Schritt 5, Bild 3 von 3
    • Place your fingernail or a plastic opening tool in the space between the camera housing and the flash housing.

    • Carefully pry up on the flash housing. It will pop up automatically.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 3 : Schritt 6, Bild 2 von 3 : Schritt 6, Bild 3 von 3
    • Remove the two 4-mm J000 screws positioned at the bottom of the flash housing.

    • The housing will now be hanging only by the ribbon supplying power.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 3 : Schritt 7, Bild 2 von 3 : Schritt 7, Bild 3 von 3
    • Using your fingers or plastic opening tool, remove the back half from the front half of the flash housing. The front half will stay on.

    • Sudden or large force can rip the flash power supply off.

  8. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 8, Bild 1 von 3 : Schritt 8, Bild 2 von 3 : Schritt 8, Bild 3 von 3
    • Place a plastic opening tool on the clear lens of the flash.

    • Gently push on the lens to remove the front half of the flash housing.

Ziellinie

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Matt Staubus

Mitglied seit: 10/05/16

849 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team 9-5, Lacy Fall 2016 Mitglied von USF Tampa, Team 9-5, Lacy Fall 2016

USFT-LACY-F16S9G5

4 Mitglieder

10 Anleitungen geschrieben

4 Kommentare

I dropped my coopix and cannot get it back in. Is there a way to replace the flash?

Charles Cezeaux - Antwort

Dropped my Nikon Coolpix S9700 and broke the flash. It will not go back inside camera. Can it be replaced or repaired?

Charles Cezeaux - Antwort

Does anyone know if it can be replaced or repaired?

Charles Cezeaux - Antwort

I have done this to my camera. Cannot find replacement for flash. Can i use the camera as is?

Charles Cezeaux - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 25

Insgesamt: 980