Zum Hauptinhalt wechseln

Einleitung

If your Nikon D3100 LCD screen is cracked, chipped, or flickering it may need to be replaced. Follow this guide to replace the LCD screen. But first take a look at this troubleshooting page to check if the problem is truly the LCD screen and not a setting issue.

  1. Use a Phillips #00 screwdriver for all of the screws.
    • Use a Phillips #00 screwdriver for all of the screws.

    • Remove two of the 4mm screws indicated by the circles on the bottom side of the camera.

  2. Remove four of the 3mm screws around the eye piece located on the top of the back panel, including the screw hidden behind the auto focus label. Remove the 3mm screw behind the rubber grip on the top right of the back panel.
    • Remove four of the 3mm screws around the eye piece located on the top of the back panel, including the screw hidden behind the auto focus label.

    • Remove the 3mm screw behind the rubber grip on the top right of the back panel.

    For my camera, the two bottom screws were 3mm, the upper left is 4 or 5mm, and the upper right (behind the label) is much larger.

    No problem, and they’re unambiguous

    Rob Cuthbertson - Antwort

  3. Peel back the rubber grip on the right side of the camera using a spudger.
    • Peel back the rubber grip on the right side of the camera using a spudger.

    • You may need a heating pad to melt the glue holding the rubber grip to the camera. If using the heating pad, use caution and handle carefully.

    • Remove two of the 5mm screws under the rubber grip.

  4. iPhone Akku Fix Kits

    Nur $29.99

    Buy Now

    iPhone Akku Fix Kits

    Nur $29.99

    Buy Now
  5. Remove two of the 4mm screws on the left side of the camera.
    • Remove two of the 4mm screws on the left side of the camera.

    You also have to remove the rubber cover for these ports, or you won’t be able to do the next step. Pull gently directly away from the camera body until the strap comes out. Re-insertion is as simple - push gently, or guide with a small flat-head screwdriver

    Rob Cuthbertson - Antwort

  6. Starting from the top, gently lift the back panel of the camera off. Slowly separate the back panel from the main body of the camera. Be careful not to pull the panel out too fast or the ribbon may be damaged.
    • Starting from the top, gently lift the back panel of the camera off. Slowly separate the back panel from the main body of the camera.

    • Be careful not to pull the panel out too fast or the ribbon may be damaged.

    • Carefully remove the ribbon using a spudger to lift up the connector and then use tweezers to pull out the ribbon.

    • Separate the back panel from the main body of the camera.

  7. Be careful when separating the metal plate from the back panel because the speaker wire is connected to the metal plate. It can easily be torn if caution is not taken.
    • Be careful when separating the metal plate from the back panel because the speaker wire is connected to the metal plate. It can easily be torn if caution is not taken.

    • Remove nine of the 3mm screws connecting the metal plate to the plastic panel.

  8. Remove the tape covering the ribbons. Be careful not to break the tape.
    • Remove the tape covering the ribbons. Be careful not to break the tape.

  9. Remove the two ribbons connecting the LCD screen to the metal plate using the same method from Step 5.
    • Remove the two ribbons connecting the LCD screen to the metal plate using the same method from Step 5.

  10. Remove the old LCD screen from metal plate.
    • Remove the old LCD screen from metal plate.

    • Make sure the new LCD screen is clean.

    • Carefully install the new LCD screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Jet Mejia

Mitglied seit: 26.09.2016

511 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team 14-1, Eyestone Fall 2016 Mitglied von USF Tampa, Team 14-1, Eyestone Fall 2016

USFT-EYESTONE-F16S14G1

3 Mitglieder

3 Anleitungen geschrieben

Very helpful guide, so happy to have a non-cracked screen again!

Rob Cuthbertson - Antwort

now, where can i buy this replacement screen here in the Philippines?

leumas_erbutco - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 20

Letzte 30 Tage: 98

Insgesamt: 4,867