Einleitung

If there is a power problem, you may need to reattach wires to the battery compartment or replace it completely. If the problem is Corrosion, just see the guide on corrosion.

  • In this guide we will be referring to 'left' and 'right' as though the camera's front (the part that says Nikon) is facing you.

  • Unscrew the large metal screw on the left side using a quarter and remove the battery cover.(Picture not available)

Kommentar hinzufügen

Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.
  • Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.

Kommentar hinzufügen

  • Pull up on the tab to remove the batteries.

  • Note: The batteries will probably fall out of their holder.

Kommentar hinzufügen

  • Use a 00 Phillips head screwdriver to remove the four screws from inside the case.

Kommentar hinzufügen

  • Remove the battery compartment from the camera.

  • Note: On some models, the compartment is soldered in by the wires shown. If so you will need to desolder them.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Zachary Phillips

Mitglied seit 08.04.2011

205 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 25-26, Garner Spring 2011 Mitglied von Cal Poly, Team 25-26, Garner Spring 2011

CPSU-GARNER-S11S25G26

3 Mitglieder

6 Anleitungen geschrieben

Hey, i lost the bracket… do u guys have any idea where could i get one?

David mate - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 10

Letzte 30 Tage: 84

Insgesamt: 9,264