Einleitung
If there is a power problem, you may need to reattach wires to the battery compartment or replace it completely. If the problem is Corrosion, just see the guide on corrosion.
Was du brauchst
-
-
Unscrew the large metal screw on the left side using a quarter and remove the battery cover.(Picture not available)
-
-
-
Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.
-
-
-
-
Use a 00 Phillips head screwdriver to remove the four screws from inside the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.
Ein Kommentar
Hey, i lost the bracket… do u guys have any idea where could i get one?