Zum Hauptinhalt wechseln

Einleitung

Changing the tubes when the device is leaking water from the bottom will require some time but can fix a few problems. Make sure the device is in a secure open area where you will not lose any screws because they are very small. You will definitely want the magnetic pad provided in the iFixit tool kit. Warning: be careful when you take off the protective plate because there are a lot of wires that can not be disconnected.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Unscrew (8) 6mm screws using Phillips head #1 screwdriver Remove bottom cover
    • Unscrew (8) 6mm screws using Phillips head #1 screwdriver

    • Remove bottom cover

  2. Unscrew (3) 6mm screws with Phillips head #1 screwdriver
    • Unscrew (3) 6mm screws with Phillips head #1 screwdriver

    • Remove tube protection plate

  3. Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen

    Android Fix Kits

    Ein neues Display oder Akku sind nur ein Kit entfernt.

    Jetzt kaufen
  4. Detach valve tubes from valve by squeezing pins and pull tubes away from valve
    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

  5. Detach valve tubes from device by pinching pins and sliding the tubes off
    • Detach valve tubes from device by pinching pins and sliding the tubes off

Abschluss

To reassemble your device, follow these instructions in reverse order.

Naser Aldousari

Mitglied seit: 10.10.2017

304 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team S13-G69, Cagle Fall 2017 Mitglied von USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 Mitglieder

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

Insgesamt: 193