Zum Hauptinhalt wechseln

Ninja Coffee Bar CF086 Water Heating Element Replacement

Was du brauchst

  1. Ninja Coffee Bar CF086 Water Heating Element Replacement, Water Heating Element: Schritt 1, Bild 1 von 2 Ninja Coffee Bar CF086 Water Heating Element Replacement, Water Heating Element: Schritt 1, Bild 2 von 2
    • Make sure the Ninja Coffee Bar is unplugged and that you have a dry, clean workspace for this task.

    • Remove the carafe and water reservoir and set them aside.

  2. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 2, Bild 1 von 1
    • Unscrew the T-10 screws from the bottom cover of the machine, and remove that bottom cover.

    How many screws should be taken out before the bottom cover is removable? Some of them are set in much deeper holes (sorry I don’t know the technical terminology), and I’m not sure if the cover on mine is stuck because it’s sticky or because it’s still screwed in.

    Caitlin - Antwort

  3. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 3, Bild 1 von 1
    • Unscrew and remove the heating plate layer. This will expose the internal workings of the machine.

  4. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 4, Bild 1 von 1
    • Locate the water heating element in the interior of your coffee maker.

    • Unscrew the two indicated J1S1 screws at the base of the water heating element.

  5. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 5, Bild 1 von 1
    • Unscrew and remove the remaining J1S1 screws that secure the water heating element to the interior of the device.

  6. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 6, Bild 1 von 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 6, Bild 2 von 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 6, Bild 3 von 3
    • Grasp and remove the clamp securing the tube that feeds into the base of the water heating element.

    • Detach the tube from the water heating element.

  7. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 7, Bild 1 von 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 7, Bild 2 von 2
    • Locate the coated wire that feeds into the side of the water heating element. Remove this wire.

  8. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 8, Bild 1 von 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 8, Bild 2 von 2
    • Locate the two wires leading out from the water heating element that feed into crimp connectors.

    • Using side cutters, sever these wires near the crimp connectors.

    • Use the side cutters to cut the remaining wires that feed into the crimp connectors from the coffee machine.

  9. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 9, Bild 1 von 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 9, Bild 2 von 2
    • Squeeze and remove the clamp that secures the main tube feeding into the water heating element. Remove that tube.

    • Remove the water heating element.

  10. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 10, Bild 1 von 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 10, Bild 2 von 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 10, Bild 3 von 3
    • Using wire strippers, strip the cut wires from your coffee machine near their cut ends to expose 2 cm of metal conductor from each.

    • Use a similar procedure to strip the wires from your replacement heating element. Using wire strippers, expose 2 cm of metal conductor from the ends of the wires.

  11. Ninja Coffee Bar CF086 Water Heating Element Replacement: Schritt 11, Bild 1 von 1
    • Prepare two crimp connectors by filling them with dielectric grease.

    • Use a crimp connector to connect a stripped end of the wire leading from the replacement heating element to the stripped end of the corresponding wire from the coffee maker.

    • Using a second crimp connector, repeat for the remaining pair of stripped wires.

    • Using the appropriate crimping tool, crimp the connectors.

Abschluss

To finish reassembling your device, follow steps 2-7 in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

David Ton

Mitglied seit: 10/02/17

630 Reputation

5 Anleitungen geschrieben

Team

USF Tampa, Team S1-G5, Thompson Fall 2017 Mitglied von USF Tampa, Team S1-G5, Thompson Fall 2017

USFT-THOMPSON-F17S1G5

4 Mitglieder

5 Anleitungen geschrieben

2 Kommentare

Where is the heating element available for sale.

ausbinp - Antwort

I need a element for a CM401 model, any help?. gene@wholedamarea.com

Lester Bouler - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 8

Letzte 30 Tage: 49

Insgesamt: 4,216