Einleitung
This guide shows how to remove the metal plate that covers the motherboard.
Was du brauchst
-
-
Remove the expansion pack cover by pushing in the tab and pulling out.
-
-
-
Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.
-
-
-
-
Remove the fourteen screws indicated in the example using the larger Phillips screwdriver.
-
-
-
Remove the metal plate indicated in the example by sliding it back and then lifting it up.
-
-
-
Remove the two screws indicated in the example using the smaller Phillips screwdriver.
-
-
-
Remove the screw to the right of the LED light using the larger Phillips screwdriver.
-
-
-
Remove the small metal bracket from the front of the expansion pack slot with the metal spudger.
-
-
-
Remove the seven screws indicated in the example using the larger Phillips screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 5-4, Regan Fall 2009 Mitglied von Cal Poly, Team 5-4, Regan Fall 2009
CPSU-REGAN-F09S5G4
7 Mitglieder
15 Anleitungen geschrieben
