Zum Hauptinhalt wechseln

Nintendo DS Lite Wi-Fi Platine Austausch

Was du brauchst

  1. Nintendo DS Lite Wi-Fi Platine Austausch, Akku: Schritt 1, Bild 1 von 2 Nintendo DS Lite Wi-Fi Platine Austausch, Akku: Schritt 1, Bild 2 von 2
    • Drehe die Kreuzschlitzschraube am Akkufachdeckel heraus.

    • Die Schraube bleibt im Deckel hängen.

    • Heble den Deckel mit einem Spudger oder Fingernagel hoch. Entnimm ihn aus dem Gehäuse.

    A Phillips #000 (PH000) seems to give a more secure fit (no slipping) than the stated Phillips #00.

    Ritchie - Antwort

    This will be good for mods

    Matthew Bevins - Antwort

    I'm having a problem getting the screw to unscrew. I have the right Phillips ( it was included with all the stuff I got this) Any tips. it doesn't look like the screw is spinning but i haven't played my Nintendo DS Lite for 3 years.

    whittlegirls - Antwort

    bonjour j’ai une petite question pour vous fais trés longtemps que j’ai pas utiliser mon nintendo ds lite et quand je le branche il allume 1 fois orange après il s’enteint même s’il est brancher ça veux tu dire qu’il faut que je change de batterie ? Merci

    Marie-Julie Richer - Antwort

    Soit un changement de batterie, soit la carte-mère a peut-être un court-circuit :/

    Polaris -

  2. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 2, Bild 1 von 1
    • Zwänge die Kante eines Spudgers zwischen der Seite des Akkus und dem Gehäuse. Heble nach oben um den Akku zu lösen.

    • Entferne den Akku vom DS Lite.

  3. Nintendo DS Lite Wi-Fi Platine Austausch, Unteres Gehäuseteil: Schritt 3, Bild 1 von 2 Nintendo DS Lite Wi-Fi Platine Austausch, Unteres Gehäuseteil: Schritt 3, Bild 2 von 2
    • Entferne mit der Spudgerspitze die Gummifüße des DS Lite.

  4. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 4, Bild 1 von 1
    • Das untere Gehäuseteil ist mit verschiedenen Schrauben befestigt. Drehe sie heraus:

    • Zwei goldfarbene 4,3 mm Kreuzschlitzschrauben

    • Eine schwarze 3,9 mm TriWing Schraube

    • Eine 3,3 mm silberfarbene Kreuzschlitzschraube

    • Drei silberfarbene 5,5 mm TriWing Schrauben.

    Not mentioned is to remove the jumper/connector below the word "SLOT-2". Case WILL NOT separate otherwise.

    Kayla - Antwort

    In the separation step below, the third picture show the case with the jumper/connector removed.

    Kayla - Antwort

    I cannot remove the tri-wing screws.

    Zach Smith - Antwort

    Same to me. I tried opening the case by force. Broke several parts of the motherboard…

    Leon -

    I can't remove the final tri wing screw in the battery section and it looks like I grinded the screw out too much for any screwdriver to work.Is there anything I can do?

    Quintin Harbin - Antwort

    From what I know, the only solution is to drill the screw out with a very small-headed drill :/

    Polaris -

  5. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 5, Bild 1 von 3 Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 5, Bild 2 von 3 Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 5, Bild 3 von 3
    • Entferne die Abdeckung vom Game Pak Einschub, bevor du weiterarbeitest.

    • Setze die Kante eines Spudgers zwischen das oberen und unteren Gehäuseteil in der Nähe der oberen rechten Ecke des DS Lite.

    • Schiebe den Spudger vorsichtig die rechte Seite des DS Lite entlang, dabei öffnet sich ein Spalt.

    • Schiebe den Spudger weiter um die Seiten des DS Lite, bis ein Großteil des Gehäuses getrennt ist.

    Don’t forget to remove the GBA cartridge placeholder before removing the backside

    Cees Jan de Boer - Antwort

    You forgot to mention to remove the battery compartment Phillips screw.

    nathan lowe - Antwort

  6. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 6, Bild 1 von 1
    • Hebe das untere Gehäuseteil weg vom Game Boy.

    • Ziehe vorsichtig. Manche Geräte sind verklebt, wenn du zu stark ziehst kannst du den Einschaltknopf beschädigen.

    • Achte beim Zusammenbau darauf, dass die Einschalttaste und die Lautstärkeregler richtig in die entsprechenden Schalter auf der Hauptplatine passen.

    When you reassemble, make sure that you have the volume and power buttons in place, and make sure they are in the right position to line up with the switches on the motherboard. If they are not aligned, you risk snapping off the tiny switches on the motherboard (in which case, you are in for some soldering work).

    Eric - Antwort

    I should have read the comments first - broke off the power switch because I didn't know about aligning it. No way I can do soldering, guess it's for the dustbin :-(

    Emma -

    Whoops, remembered the power button but forgot the volume slider.

    I'll do it later.

    analbonghits -

    There is no way that the fact you have to line up the volume and power switch toggles upon reassembly is not in this guide. I just carefully followed this guide to replace the shoulder buttons but ruined my DS lite because I didn’t read these (practically hidden comments due to the design of the website) comments and broke the power switch. Thankfully there are 150 million DS I can buy second hand but “repeat the steps backwards” wasn’t sufficient in this repair. And that’s what this website is for.

    Ryan -

  7. Nintendo DS Lite Wi-Fi Platine Austausch, Auslösetasten: Schritt 7, Bild 1 von 2 Nintendo DS Lite Wi-Fi Platine Austausch, Auslösetasten: Schritt 7, Bild 2 von 2
    • Hebe beide Auslösetasten aus dem DS Lite.

    • Die Tasten werden von kleinen Stiften und Federn gehalten. Verliere diese Teile nicht.

    • Im zweiten Bild siehst du wie die Auslösetasten und ihre Teile für den Zusammenbau konfiguriert werden.

    Anything after step 7 is unnecessary if having to replace the left or right trigger button(s).

    Nate River - Antwort

    The second picture does not show the correct configuration of the button spring. It should be flipped. Look at the trigger on the left of the larger image; that is the correct configuration.

    wrekone - Antwort

  8. Nintendo DS Lite Wi-Fi Platine Austausch, Wi-Fi Platine: Schritt 8, Bild 1 von 1
    • Hebe den Verbinder der WiFi Antenne mit dem flachen Ende des Spudgers gerade aus dem Sockel auf der WiFi Platine.

    There is absolutely no need to follow steps 8-13 if like me, all you needed to do was access the face buttons for cleaning/replacement. Once you have unscrewed the motherboard from the front casing you can just flip it up, making sure you take the front screen with it. You will have full access to the buttons and all of their contacts. No need to remove the wifi board and microphone cable, etc. Also, replacing the ribbon cables for the screen is especially frustrating. Avoid taking them out at all costs, if you can.

    James McCarthy - Antwort

    what is the "etc."?

    Rita Cao -

    For those replacing the bottom screen, you can just skip to step 13 and go from there. No need to remove the wifi board, antenna, etc.

    lowestseries - Antwort

  9. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 9, Bild 1 von 1
    • Heble den Verbinder der WiFi Platine mit dem flachen Ende des Spudgers aus gerade aus dem Sockel auf der Hauptplatine.

    the i was working on had a different wifi connector. i thought a had broken it but the thing underneath it was just to balance it on the motherboard.

    BigD29853 - Antwort

    Do you have to put back in the WiFi board? As far as I know it does not require it to play games.

    Aiden Harlin - Antwort

    With the Nintendo servers now off, and all the games are playable without WiFi. That being said, I don’t know what is used for local multiplayer.

    Polaris -

  10. Nintendo DS Lite Wi-Fi Platine Austausch: Schritt 10, Bild 1 von 1
    • Trenne die rechte Kante der WiFi Platine mit dem flachen Ende des Spudgers von der Hauptplatine.

    • Die WiFi Platine ist an der Hauptplatine festgeklebt.

    • Entferne die WiFi Platine vom DS Lite.

    I took it apart successfully and I replaced the screen but I've put it back together and it the green light turns on for about 2seconds quiet dim, brighter for about 1 and then it turns off... I then took the wifi board out, and it turned on! What have I done to it and why doesn't it work with it and only without?!

    Brianlewis - Antwort

    Exact same symptoms for me : on boot up, green light would stay on for 1 second, then shut down. Without wifi, green light would stay on, but blank screens. In fact, it's because on boot up, DS will check if wifi is present, and stop if there is an error. Then, it checks for upper screen, and after that, for lower screen. If one of these is not responding, DS will turn off. I check my cables (upper screen) and DS started again with no problem.

    Alexandre - Antwort

Abschluss

Um dein Gerät wieder zusammen zu setzen folge den Schritten in umgekehrter Reihenfolge.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

VauWeh hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Matthew Newsom

Mitglied seit: 01/05/10

39.496 Reputation

67 Anleitungen geschrieben

3 Kommentare

So I came across a "Prison edition" DSLite out of the Kentucky DOC It I was told that the wifi card was disabled but I take it apart and see that it is still there pluged in and everything you don't happen to know how to turn it back on do you it is a gift for my little brother and would like the WiFi to work.

Vincent - Antwort

Question anyone knows what the pin layout of the board

Aaron Darren - Antwort

Merhaba Nintendo Ds lite da wifi kartı bozuldugunda ekran açılmaması normal mi ds lite a güç geliyor ışıklar yanıyor ama ekran gelmiyor

Boş - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 34

Letzte 30 Tage: 137

Insgesamt: 15,662