Zum Hauptinhalt wechseln

Nintendo DS Main Circuit Board Replacement

Was du brauchst

  1. Nintendo DS Main Circuit Board Replacement, Battery: Schritt 1, Bild 1 von 3 Nintendo DS Main Circuit Board Replacement, Battery: Schritt 1, Bild 2 von 3 Nintendo DS Main Circuit Board Replacement, Battery: Schritt 1, Bild 3 von 3
    • Remove the cartridge from the console.

    • Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.

    • Remove the battery door.

    • In the images, it shows that the fixer is using a flathead screwdriver. This flathead screwdriver will work just like the Phillips #00 Screwdriver.

  2. Nintendo DS Main Circuit Board Replacement: Schritt 2, Bild 1 von 1
    • Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic opening tool or spudger isn't available, your fingernails may work.

  3. Nintendo DS Main Circuit Board Replacement: Schritt 3, Bild 1 von 1
    • Remove the battery from the Nintendo DS.

  4. Nintendo DS Main Circuit Board Replacement, Back Panel: Schritt 4, Bild 1 von 1
    • Remove the seven 6.4mm Y00 screws located on the back.

    • If your DS has a lanyard attached to it, you can remove it to make the process of opening the top-left screw easier.

  5. Nintendo DS Main Circuit Board Replacement: Schritt 5, Bild 1 von 3 Nintendo DS Main Circuit Board Replacement: Schritt 5, Bild 2 von 3 Nintendo DS Main Circuit Board Replacement: Schritt 5, Bild 3 von 3
    • With your hands, pry the back panel off the main case.

    • Separate the back from the front, and set it aside.

  6. Nintendo DS Main Circuit Board Replacement, Main Circuit Board: Schritt 6, Bild 1 von 1
    • Using a Phillips #00 screwdriver, remove the 4 screws on the circuit board.

    • Be careful NOT to slip with the screwdriver, you can damage the circuit board!

  7. Nintendo DS Main Circuit Board Replacement: Schritt 7, Bild 1 von 3 Nintendo DS Main Circuit Board Replacement: Schritt 7, Bild 2 von 3 Nintendo DS Main Circuit Board Replacement: Schritt 7, Bild 3 von 3
    • Unlock the two large ribbon cables by moving the black clip up.

    • Carefully pull the ribbon cables down and out with your fingers.

    • Do not use pliers to pull the cables, as they can be damaged easily.

  8. Nintendo DS Main Circuit Board Replacement: Schritt 8, Bild 1 von 2 Nintendo DS Main Circuit Board Replacement: Schritt 8, Bild 2 von 2
    • Locate the two small ribbon cables, beneath the rightmost large ribbon cable.

    • Slide the locks for the small ribbon cables down to the side, and remove the cables.

    • It may be useful to use tweezers to remove the small ribbon cables.

    • Be careful not to damage the delicate ribbon cables.

  9. Nintendo DS Main Circuit Board Replacement: Schritt 9, Bild 1 von 2 Nintendo DS Main Circuit Board Replacement: Schritt 9, Bild 2 von 2
    • Locate the Wifi antenna pigtail connector

    • Remove the antenna by grasping it at the head with tweezers. Using a slight rocking motion, pull up to dislodge the connector.

  10. Nintendo DS Main Circuit Board Replacement: Schritt 10, Bild 1 von 1
    • Feed the ribbon cables through the opening on the board.

    • Pull up and remove the circuit board, and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

20 weitere Nutzer:innen haben diese Anleitung absolviert.

kingdesmond

Mitglied seit: 10/27/09

2.050 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 18-3, Maness Fall 2009 Mitglied von Cal Poly, Team 18-3, Maness Fall 2009

CPSU-MANESS-F09S18G3

4 Mitglieder

28 Anleitungen geschrieben

Ein Kommentar

This was really helpful. Thank you!

Jess Anderson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 8

Letzte 7 Tage: 43

Letzte 30 Tage: 237

Insgesamt: 27,755