Zum Hauptinhalt wechseln

Nintendo Game Boy Advance SP Power Switch Cover Replacement

Was du brauchst

  1. Nintendo Game Boy Advance SP Power Switch Cover Replacement, Battery: Schritt 1, Bild 1 von 1
    • Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

  2. Nintendo Game Boy Advance SP Power Switch Cover Replacement: Schritt 2, Bild 1 von 1
    • Lift the battery cover up and remove it from the device.

    • The screw will remain attached to the battery cover because of Nintendo's design.

  3. Nintendo Game Boy Advance SP Power Switch Cover Replacement: Schritt 3, Bild 1 von 1
    • Use your fingers or a plastic opening tool to remove the battery from the device.

    • Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

  4. Nintendo Game Boy Advance SP Power Switch Cover Replacement, Back Cover: Schritt 4, Bild 1 von 2 Nintendo Game Boy Advance SP Power Switch Cover Replacement, Back Cover: Schritt 4, Bild 2 von 2
    • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

    • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

  5. Nintendo Game Boy Advance SP Power Switch Cover Replacement: Schritt 5, Bild 1 von 1
    • Lift the back cover off of the device.

    • Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.

    • Look out for the power switch that can fall out when taking the back cover off.

  6. Nintendo Game Boy Advance SP Power Switch Cover Replacement, Power Switch Cover: Schritt 6, Bild 1 von 2 Nintendo Game Boy Advance SP Power Switch Cover Replacement, Power Switch Cover: Schritt 6, Bild 2 von 2
    • Locate the power switch.

    • Using your fingers, lift the power switch from the left side of the Game Boy Advance SP.

Abschluss

To reassemble your device, follow these instructions in reverse order.

17 weitere Nutzer:innen haben diese Anleitung absolviert.

DJ Pantone

Mitglied seit: 01/11/13

1.924 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 17-22, Forte Winter 2013 Mitglied von Cal Poly, Team 17-22, Forte Winter 2013

CPSU-FORTE-W13S17G22

4 Mitglieder

39 Anleitungen geschrieben

Ein Kommentar

This doesn't explain anything about how to replace the switch

Michael - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 6

Letzte 7 Tage: 26

Letzte 30 Tage: 159

Insgesamt: 20,020