Repariere deine Sachen Community Store

Nintendo GameCube Controller Buttons Replacement

Einleitung

This guide will show you how to properly remove most of the buttons from the controller. You may want to read this if your buttons are sticky

Was du brauchst

  1. Nintendo GameCube Controller Buttons Replacement, Back Panel: Schritt 1, Bild 1 von 1

    • Place the controller (buttons down) on a solid surface.

    • Remove the six 9.2mm Tri-wing Y0 screws that hold the back panel in place.

    Übersetzen

  2. Nintendo GameCube Controller Buttons Replacement: Schritt 2, Bild 1 von 1

    • Gently lift the back panel up, separating it from the front panel.

    • Some of the buttons may fall out if they are knocked around.

    Übersetzen

  3. Nintendo GameCube Controller Buttons Replacement, Z Button: Schritt 3, Bild 1 von 2 Nintendo GameCube Controller Buttons Replacement, Z Button: Schritt 3, Bild 2 von 2

    • Grab the Z-button by the peg with tweezers and lift it out of the controller.

    • During re-assembly, make sure the plastic rim and spring fit into the slot provided, or else the case will not shut.

    Übersetzen

  5. Nintendo GameCube Controller Buttons Replacement, Circuit Board: Schritt 4, Bild 1 von 1

    • Carefully unhook the cable that is looped around the peg.

    Übersetzen

  6. Nintendo GameCube Controller Buttons Replacement: Schritt 5, Bild 1 von 1

    • Lift the circuit board out of the controller.

    • Do not grab the rumble motor to lift the circuit board as shown in the picture. It will in many cases just remove the rumble motor. Instead, grab the edges of the board.

    Übersetzen

  7. Nintendo GameCube Controller Buttons Replacement, Buttons: Schritt 6, Bild 1 von 2 Nintendo GameCube Controller Buttons Replacement, Buttons: Schritt 6, Bild 2 von 2

    • Remove the rubber backing that covers the buttons.

    Übersetzen

  8. Nintendo GameCube Controller Buttons Replacement: Schritt 7, Bild 1 von 3 Nintendo GameCube Controller Buttons Replacement: Schritt 7, Bild 2 von 3 Nintendo GameCube Controller Buttons Replacement: Schritt 7, Bild 3 von 3

    • Use tweezers to lift buttons out of their sockets.

    • When putting the buttons back, make sure the slots properly fit back together.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

18 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 7 anderen Mitwirkenden

Sean Michel

Mitglied seit: 01/14/13

2.496 Reputation

8 Anleitungen geschrieben

Auszeichnungen: 17

+ 14 weitere Auszeichnungen

Team

Cal Poly, Team 19-44, Regan Winter 2013 Mitglied von Cal Poly, Team 19-44, Regan Winter 2013

CPSU-REGAN-W13S19G44

4 Mitglieder

26 Anleitungen geschrieben

3 Kommentare

Is there a way I can buy the buttons separably? I lost a the X button and it's gone missing and i wanna buy one :(

tp4yourbunghole - Antwort

u can either get a 2 dollar full button set on ebay by searching ngc buttons or u can buy from battle beaver customs for 1 dollar

dariuscorrfz - Antwort

How do you put the back back on?

Steven Enns - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 7

Letzte 7 Tage: 53

Letzte 30 Tage: 126

Insgesamt: 29,118