Zum Hauptinhalt wechseln

Nintendo GameCube Top Case Replacement

Was du brauchst

  1. Nintendo GameCube Top Case Replacement, Top Case: Schritt 1, Bild 1 von 3 Nintendo GameCube Top Case Replacement, Top Case: Schritt 1, Bild 2 von 3 Nintendo GameCube Top Case Replacement, Top Case: Schritt 1, Bild 3 von 3
    • Turn over the Gamecube so that the bottom side is facing up.

    • Use the 4.5 mm Gamebit screwdriver to remove all four screws.

  2. Nintendo GameCube Top Case Replacement: Schritt 2, Bild 1 von 3 Nintendo GameCube Top Case Replacement: Schritt 2, Bild 2 von 3 Nintendo GameCube Top Case Replacement: Schritt 2, Bild 3 von 3
    • With the bottom side of the GameCube facing upward and the screws removed, carefully pull the outer shell of the unit away from the top half.

    • Move the GameCube so that the inside is facing upwards.

    This can also be done whilst being in the normal upright position after all 4 of the 4.5mm Gamebit screws have been removed. Pull the top of the shell directly upwards and it should slide off easily.

    Less chance of snagging any wires or parts.

    Christopher Cox - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer:innen haben diese Anleitung absolviert.

dcarlin

Mitglied seit: 11/05/09

301 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 6-2, Maness Fall 2009 Mitglied von Cal Poly, Team 6-2, Maness Fall 2009

CPSU-MANESS-F09S6G2

4 Mitglieder

44 Anleitungen geschrieben

Ein Kommentar

Can you do a more in-depth version of the top cover? I had to clean each piece and need help figuring out where all the pieces go. Thanks

JJ Jackson - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 35

Letzte 30 Tage: 150

Insgesamt: 24,302