Nintendo Switch Lite Back Panel Replacement

Einleitung

Follow this guide to replace a cracked or damaged back panel on the Nintendo Switch Lite.

Was du brauchst

Schritt 1 Remove the back panel screws

Nintendo Switch Lite Back Panel Replacement, Remove the back panel screws: Schritt 1, Bild 1 von 1

In diesem Schritt verwendetes Werkzeug:

Magnetic Project Mat

$19.95

Kaufen

Before beginning this repair, make sure that the device is completely turned off.
Use a Y00 screwdriver to remove the four 6.3 mm-long screws securing the back panel.
Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

Übersetzen

Schritt 2 Remove the top and bottom back panel screws

Nintendo Switch Lite Back Panel Replacement, Remove the top and bottom back panel screws: Schritt 2, Bild 1 von 2

Nintendo Switch Lite Back Panel Replacement, Remove the top and bottom back panel screws: Schritt 2, Bild 2 von 2

Use a Phillips screwdriver to remove the following screws securing the back panel:
Two 3.6 mm-long screws on the top of the device
Two 3.6 mm-long screws on the bottom of the device

Übersetzen

Schritt 3 Release the clips securing the back panel

Nintendo Switch Lite Back Panel Replacement, Release the clips securing the back panel: Schritt 3, Bild 1 von 2

Nintendo Switch Lite Back Panel Replacement, Release the clips securing the back panel: Schritt 3, Bild 2 von 2

Insert an opening tool into the left speaker grille on the bottom of the device.
Twist the opening tool to release the clips securing the back panel.
Avoid inserting the opening tool further than required to prevent damage to the speaker module.

Übersetzen

Schritt 4 Continue releasing the clips around the device

Nintendo Switch Lite Back Panel Replacement, Continue releasing the clips around the device: Schritt 4, Bild 1 von 2

Nintendo Switch Lite Back Panel Replacement, Continue releasing the clips around the device: Schritt 4, Bild 2 von 2

Slide the opening tool around the bottom-left corner to release the clips on the left side of the device.

Übersetzen

Schritt 5

Insert an opening tool into the right speaker grille on the bottom of the device.
Twist the opening tool to release the clips.
Avoid inserting the opening tool further than required to prevent damage to the speaker module.

Übersetzen

Schritt 6

Slide and pry the opening tool around the bottom-right corner to release the clips on the right side of the device.

Übersetzen

Schritt 7

Continue sliding and prying the opening tool along the gap on the top of the device to release the clips.

Übersetzen

Schritt 8 Remove the back panel

Nintendo Switch Lite Back Panel Replacement, Remove the back panel: Schritt 8, Bild 1 von 3

Nintendo Switch Lite Back Panel Replacement, Remove the back panel: Schritt 8, Bild 2 von 3

Nintendo Switch Lite Back Panel Replacement, Remove the back panel: Schritt 8, Bild 3 von 3

Lift the bottom edge of the back panel, opening it like a book.
Remove the back panel.

Übersetzen

Abschluss

Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Nintendo Switch Lite Answers community for help.

14 weitere Nutzer:innen haben diese Anleitung absolviert.