Nintendo Switch Loudspeaker Replacement

Remove the four 6.3mm Tri-point Y00 screws from the rear panel.

Remove the single 6.1mm JIS #000 screw from underneath the kickstand.

Remove the two 2.7mm JIS #000 screws from the bottom of the device.

Remove the single 2.7mm JIS #000 screw from the top of the device.

Remove the single 3.8mm JIS #0 screw from the right Joy-Con rail.

Remove the single 3.8mm JIS #0 screw from the left Joy-Con rail.

Pull the rear panel up and off of the device.

Remove the six 3.1mm JIS #000 screws from the shield plate.

Remove the shield plate from the device.

Pull the right loudspeaker connector straight out of the socket on the motherboard.

Gently lift the loudspeaker up by its wires and pull out at a 45 degree angle to remove.

Pull the left loudspeaker connector straight out of the socket on the motherboard.

Gently lift the loudspeaker up by its wires and pull out at a 45 degree angle to remove.