Zum Hauptinhalt wechseln

Nintendo WaveBird Wireless Controller Front Panel Replacement

Was du brauchst

  1. Nintendo WaveBird Wireless Controller Front Panel Replacement, Batteries: Schritt 1, Bild 1 von 2 Nintendo WaveBird Wireless Controller Front Panel Replacement, Batteries: Schritt 1, Bild 2 von 2
    • Pull down on the battery cover release lever and pull back to remove the cover.

  2. Nintendo WaveBird Wireless Controller Front Panel Replacement: Schritt 2, Bild 1 von 1
    • Remove both batteries from the device.

  3. Nintendo WaveBird Wireless Controller Front Panel Replacement, Front Panel: Schritt 3, Bild 1 von 2 Nintendo WaveBird Wireless Controller Front Panel Replacement, Front Panel: Schritt 3, Bild 2 von 2
    • Remove the eight 9 mm screws from the back panel using the Tri-point Y1 screwdriver.

    • During reassembly, firmly hold the panels of the controller together while replacing the screws so the panels do not separate.

  4. Nintendo WaveBird Wireless Controller Front Panel Replacement: Schritt 4, Bild 1 von 2 Nintendo WaveBird Wireless Controller Front Panel Replacement: Schritt 4, Bild 2 von 2
    • Carefully turn over the controller and place it on a flat surface.

    • Slowly separate the top panel from the bottom panel.

    • The buttons are loose and may fall off the motherboard.

    • Once separated, set aside the top panel.

    • During reassembly, make sure the front panel lines up with the buttons so they slide back into place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer:innen haben diese Anleitung absolviert.

JT Gryder

Mitglied seit: 04/12/13

105 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 10-40, Amido Spring 2013 Mitglied von Cal Poly, Team 10-40, Amido Spring 2013

CPSU-AMIDO-S13S10G40

4 Mitglieder

37 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 9

Insgesamt: 1,505