Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Nishiki Aero II Tire Removal

Was du brauchst

  1. Nishiki Aero II Tire Removal, Removing Road Bike Front Wheel: Schritt 1, Bild 1 von 1
    • Turn the bike upside down.

  2. Nishiki Aero II Tire Removal: Schritt 2, Bild 1 von 1
    • Use a wrench to loosen the nut holding the wheel's axle on one side.

    • Once it's loose enough, continue removing the nut with your hand.

  3. Nishiki Aero II Tire Removal: Schritt 3, Bild 1 von 2 Nishiki Aero II Tire Removal: Schritt 3, Bild 2 von 2
    • After removing the nut, also remove the washer under it.

    • Keep note of how the washer has a small appendage that locks into a slot in the fork.

  4. Nishiki Aero II Tire Removal: Schritt 4, Bild 1 von 1
    • Follow the previous steps for the opposite side.

  5. Nishiki Aero II Tire Removal: Schritt 5, Bild 1 von 1
    • Lift the wheel up from the fork.

  6. Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: Schritt 6, Bild 1 von 2 Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: Schritt 6, Bild 2 von 2
    • Unscrew the cap from the air valve.

    • Release the tire's air by pressing a thin object on the center pin of the valve.

    • A hex wrench or any blunt object can be used.

  7. Nishiki Aero II Tire Removal: Schritt 7, Bild 1 von 3 Nishiki Aero II Tire Removal: Schritt 7, Bild 2 von 3 Nishiki Aero II Tire Removal: Schritt 7, Bild 3 von 3
    • Wedge a tire lever between the tire and the rim. Grab the tire with the lever's inward scoop.

    • Grab the tire's edge with the lever and pull it back to scoop the tire from the rim.

    • Keep the tire lever anchored on a spoke with the notch on the lever's opposite end.

  8. Nishiki Aero II Tire Removal: Schritt 8, Bild 1 von 2 Nishiki Aero II Tire Removal: Schritt 8, Bild 2 von 2
    • Repeat with an additional tire lever five inches away from the other.

  9. Nishiki Aero II Tire Removal: Schritt 9, Bild 1 von 3 Nishiki Aero II Tire Removal: Schritt 9, Bild 2 von 3 Nishiki Aero II Tire Removal: Schritt 9, Bild 3 von 3
    • Repeat with a third tire lever farther around the tire.

    • Alternate lifting the second and third levers until the tire comes partway off.

  10. Nishiki Aero II Tire Removal: Schritt 10, Bild 1 von 3 Nishiki Aero II Tire Removal: Schritt 10, Bild 2 von 3 Nishiki Aero II Tire Removal: Schritt 10, Bild 3 von 3
    • Wedge the tire off of the other rim with the tire levers.

    • Pull the air valve from its hole in the rim to completely remove the tire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tobias Elder

Mitglied seit: 04/25/13

113 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 21-53, Johann Spring 2013 Mitglied von Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 Mitglieder

7 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 3

Letzte 30 Tage: 9

Insgesamt: 1,212