Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Use a wrench to loosen the nut holding the wheel's axle on one side.
-
Once it's loose enough, continue removing the nut with your hand.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
After removing the nut, also remove the washer under it.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Follow the previous steps for the opposite side.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Lift the wheel up from the fork.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Unscrew the cap from the air valve.
-
Release the tire's air by pressing a thin object on the center pin of the valve.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Wedge a tire lever between the tire and the rim. Grab the tire with the lever's inward scoop.
-
Grab the tire's edge with the lever and pull it back to scoop the tire from the rim.
-
Keep the tire lever anchored on a spoke with the notch on the lever's opposite end.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Repeat with an additional tire lever five inches away from the other.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Repeat with a third tire lever farther around the tire.
-
Alternate lifting the second and third levers until the tire comes partway off.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Wedge the tire off of the other rim with the tire levers.
-
Pull the air valve from its hole in the rim to completely remove the tire.
-