Einleitung
Use this guide to change the case of a microlight.
Was du brauchst
-
-
Squeeze the top battery using a tweezer and pull the battery away from the light bulb.
-
Repeat this step for the bottom remaining battery.
-
-
-
-
Place the plastic opening tool below the LED lamp and push away from the device until you hear a click.
-
Continue to remove the LED lamp the with your fingers.
-
-
-
Place the plastic opening tool behind the logic board and bend away from the casing
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Team
CSU Fullerton, Team 2-1, Bruce Fall 2014 Mitglied von CSU Fullerton, Team 2-1, Bruce Fall 2014
CSUF-BRUCE-F14S2G1
3 Mitglieder
3 Anleitungen geschrieben
