Repariere deine Sachen Community Store

Nokero SunRay Pro Power Panel Capacitor Replacement

Einleitung

Not being able to charge your device may mean you have a bad capacitor. Follow these simple steps to get yours replaced.

Was du brauchst

  1. Nokero SunRay Pro Power Panel Capacitor Replacement, Front and Back Case: Schritt 1, Bild 1 von 1

    • Turn over the device so that the back of the device is facing up.

    Bearbeiten

  2. Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 2, Bild 1 von 3 Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 2, Bild 2 von 3 Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 2, Bild 3 von 3

    • Insert the first plastic opening tool along the side to pry open the case.

    • Sliding the plastic opening tool, while inserted, along the seam may help the removal process.

    • Use a second plastic opening tool to help separate the remaining seams.

    Bearbeiten

  4. Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 3, Bild 1 von 2 Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 3, Bild 2 von 2

    • There is a long strip of double sided adhesive foam tape that prevents the back case from easily being removed.

    • Pull the back case off by applying steady pressure to remove it from the adhesive foam tape.

    Bearbeiten

  5. Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 4, Bild 1 von 2 Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 4, Bild 2 von 2

    • Use the Phillips precision screwdriver to unscrew the two 5.0 mm Phillips screws from the circuit board.

    • Remove the solar panel and circuit board from the front case.

    Bearbeiten

  6. Nokero SunRay Pro Power Panel Capacitor Replacement, Capacitor: Schritt 5, Bild 1 von 1

    • Use the soldering station to desolder the two contact points around the connections of the capacitor to loosen the metal.

    Bearbeiten

  7. Nokero SunRay Pro Power Panel Capacitor Replacement: Schritt 6, Bild 1 von 1

    • Pull the capacitor through the circuit board to remove it.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 2 anderen Mitwirkenden

Nicholas Orr

Mitglied seit: 01/20/15

229 Reputation

2 Anleitungen geschrieben

Auszeichnungen: 8

+ 5 weitere Auszeichnungen

Team

USF Tampa, Team 9-3, Blackwell Winter 2015 Mitglied von USF Tampa, Team 9-3, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G3

3 Mitglieder

3 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 154