Einleitung
This guide will show you how to install a new motherboard and keyboard unit in your phone.
Was du brauchst
-
-
Flip the phone over so that the screen faces down.
-
Press the gray button on the battery cover and slide it down off the back of the phone.
-
-
-
Wedge the flat end of the spudger into the small indent next to the Nokia logo on the battery.
-
Gently pry the battery out of the phone.
-
-
-
-
Remove the six 6mm T6 Torx screws around the edge of the front of the phone.
-
Remove the metal frame holding the screen and speaker.
-
-
-
Gently lift motherboard unit out of the case.
-
The motherboard and keyboard are one unit and are replaced together.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
12 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 10-43, Amido Spring 2013 Mitglied von Cal Poly, Team 10-43, Amido Spring 2013
CPSU-AMIDO-S13S10G43
4 Mitglieder
14 Anleitungen geschrieben
